向Applied Mathematics and Mechanics雜志投稿有什么要求？

1Legal requirements

The author(s) guarantee(s) that the manuscript will not be published elsewhere in any language without the consent of the copyright holders, that the rights of third parties will not be violated, and that the publisher will not be held legally responsible should there be any claims for compensation.

Authors wishing to include figures or text passages that have already been published elsewhere are required to obtain permission from the copyright holder(s) and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.

Manuscripts at proof stage must be accompanied by a copyright statement.

2Manuscript submission guidelines

General remarks Manuscripts should be written in LATEX. The manuscript must be typed double-spaced between lines. Electronic submissions via the online submission are encouraged in the PDF format, to be followed upon the acceptance decision by the TEX file of the final version. Authors should allow approximately 8 weeks for an initial review cycle.

Language British or American English but not a mixture of both. Be sure to observe grammatical rules and spell correctly.

Title Use the fewest possible words that adequately describe the content of the paper.

Author(s) Name(s) and affiliation(s) of the author(s), the mailing address, telephone and fax num-bers, and E-mail of the corresponding author should be provided.

2010 Mathematics Subject Classification should be provided.

Abstract and Key words An abstract should have no more than 150 words and cover the most important results and conclusions. Mathematical expressions and citations to references should be avoided. Indexing key words are mandatory. Please choose 3 to 8 key words that describe the major points or topics covered in the article. These will facilitate indexing and information retrieval.

Abbreviations Abbreviations should be defined at first mention in the abstract and again in the main body of the text and used consistently thereafter.

Footnotes Essential footnotes to the text should be numbered consecutively and placed at the bot-tom of the page to which they refer.

Introduction The introduction should state the purpose of the investigation and give a short review of the pertinent literature.

Illustrations and Tables All figures (photographs, graphs, or diagrams) and tables should be cited in the text and numbered consecutively throughout. All images and photographs should be black-and-white; color images will be printed monochromatically. Figure legends must be brief, self-sufficient explanations of the illustrations. The legends should be placed below the figures.

Tables should have a title and a legend explaining any abbreviation used in that table. Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data.

Acknowledgements Brief and appropriate.

Appendices If there is more than one appendix, they should be numbered consecutively. Equations in appendices should be designated diffierently from those in the main body of the paper, e.g., (A1), (A2), and (A3). In each appendix, equations should be numbered separately.

References All references should be archived materials such as journal articles, books, and confer-ence proceedings. Web pages should not be referenced, since their content and accessibility may change over time. Personal communications and unpublished data are not acceptable references. References published in Chinese must be translated into English and noted by “(in Chinese)”. References require a complete author list, a complete title, and first and last pages cited for each entry. Requirements of

standard reference format are given below:

[1]Book: Author(s). Title of Book, Publisher, City of publication, referred pages (year of publication)

[2]Journal article: Author(s). Title of article. Title of Journal, Vol.(No.), referred pages (year of publication)

[3]Conference article: Author(s). Title of article. Name of Conference (ed(s). Editor(s)), Publisher, City of publication, referred pages (year of publication)

[4]Degree dissertation: Author(s). Title of Dissertation, M. Sc./Ph. D. dissertation, Conferring university, referred pages (year of publication)

[5]Patent literature: Name of patent applier. Title of Patent, Number of patent, Country of patent (date of approval)

[6]Standard literature: Number of standard. Title of Standard, Issuing department (year of issu-ing)

The following are examples:

[1]Hirsch, C. Numerical Computation of Internal and External Flows, 2nd ed., John Wiley and Sons, New York, 272–276 (1998)

[2]Zhou, J. F., Zhang, Q., and Li, J. C. Probability distribution function of near-wall turbulent velocity fluctuations. Applied Mathematics and Mechanics (English Edition), 26(10), 1245–1254 (2005)

[3]Chien, W. Z. Incompatible elements and generalized variational principle. Proceedings of Sympo-sium on Finite Element Method, Science Press, Beijing (1982)

[4]Zheng, H. P. Study on Nonlinear Dynamic Stability (in Chinese), Ph. D. dissertation, Tianjin University, 31–46 (2000)

[5]MPEG-4 Video Group. MPEG-4 Video Verification Model Version 16.0, ISO/IECJTC1/SC29/ WG11, MPEG2000/N3312, Noordwijkerhout, the Netherlands, 357–360 (2000)

[6]GB4161-84. Standard Test Method for Plane-Strain Fracture Toughness (KIC ) of Metallic Mate-rials (in Chinese), Bureau in Chinese National Standard, Beijing (1984)

3Proofreading

LATEX files are slightly modified during the TEX editing process so that the general presentation rules of the journal are adhered to. Corrections should be clear; standard correction marks should be used. Corrections that lead to a change in the page layout should be avoided. Substantial changes in content, e.g., new results, corrected values, title, and authorship, are not allowed without the approval of the responsible editor. In such a case, please contact the Editorial Office before returning the proofs to the publisher. Authors should make their proof corrections on a printout of the PDF file supplied, check-ing that the text is complete and that all figures and tables are included. The proofs, once corrected, should be signed and returned to the Editorial Office by post, or author(s) should send the statement of corrections via the online submission as soon as possible. After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article.